Types of Cement Type

Types of Cement Type

1. Portland Cement Type I
Used for general construction purposes is not wearing the special requirements of the heat of hydration and compressive strength early. Suitable for use on land and water containing sulfuric 0, 0% - 0, 10% and can be used for building residential houses, high rise buildings, paving roads, rails structure, etc.

2. Portland cement type II.
Used for the construction of mass concrete requiring sulfate resistance (the location of the land and water containing sulfate between 0, 10-0, 20%) and heat of hydration is, for example, a building just off the sea, building dibekas wetlands, irrigation, concrete mass for the dams and the foundation of the bridge.

3. Portland cement type III
Used for the construction of buildings that require high early compressive strength at the beginning phase after binding occurs, for example, for the manufacture of concrete roads, high-level buildings, buildings that do not require water resistance to sulphate attack.

4. Portland cement type IV

Is the type of cement with low heat of hydration. This type of cement used for construction purposes and increase the amount of heat needed to be minimized. Therefore, this type of cement will have a strong level of concrete with Portland slower than type I. This type of cement used for massive concrete structures such as large gravity dams where the temperature rise due to heat generated during the curing process is a critical factor.

5. Portland cement type V
Used for the construction of the buildings on the land / water containing sulfate exceeds 0, 20% and is suitable for installation of sewage treatment plant, construction of water, bridges, tunnels, ports, and nuclear power.

6. Super Masonry Cement
This cement can be used for residential construction of buildings, roads and irrigation structures 225 K maximum concrete. Can also be used as raw material for the manufacture of concrete roof tiles, hollow brick, Block Paving, tiles and other building materials.

7. Oil Well Cement, Class G-HSR (High Sulfate Resistance).
Special cement is used for the manufacture of petroleum wells and the construction of natural gas wells under the sea and earth, who has produced OWC is a class G, HSR (High Sulfate Resistance) is also known as "BASIC OWC". adaptive can be added for use in a variety of depths and temperatures.

8. Portland Composite Cement (PCC)
Fulfill the same strict quality cement Portland Composite Cement SNI 15-7064-2004. Can be widely used for general construction in all concrete. Structure-rise buildings, bridge structures, concrete road structures, building materials, concrete pre-press and pre-press, masonry, Plastering and skim, concrete panels, paving block, hollow brick, brick, tile, cut tile, more tractable, the temperature of the concrete lower so it is not easy to crack, more resistant to sulfate, the more water-resistant and skim the surface smoother.

9. Super "Portland Pozzolan Cement '(PPC).
Cement that meets the quality requirements Pozzoland SNI 15-0302-2004 Portland cement and ASTM C 595 M-05 s. Can be widely used such as:
- Mass concrete construction (dams, dams and irrigation)
- Concrete Construction which require resistance to sulphate attack (building by the beach, marshland).
- Buildings / installations that require a higher kekedapan.
- The couple and plastering work.